MotorSim 2 is a performance calculator for land vehicles (please note that this App is not a driving game, as it only does a physical simulation of their performance when accelerating in a straight line).
MotorSim 2 allows you to configure technical characteristics and calculates the resulting performance. It includes an interactive simulator with speedometer, rpm meter, throttle, brake and gear shift (manual or auto), with procedurally generated engine sound (not by sampling) an a representation of vehicle position over a 1/4 mile track segment. Once a setting has been tested, the user can save a ghost/shadow in order to later compare this setting performance with some other.
Configurable vehicle parameters are:
- Max Power
- Power curve (can be defined point by point).
- Torque curve (as power = torque * rpm , defining the power curve automatically defines torque one).
- Max engine RPM (ignition cutoff).
- Gears configuration (up to 10 gears).
- Resistances (Cx, frontal area and rolling resistance coefficients).
- Vehicle weight.
- Tyre size.
- Shift time.
- Transmission efficiency.
Calculated performance parameters are:
- Maximum speed.
- Acceleration 0-60, 0-100, 0-200, 0-300,... and so on.
- ... and any other you can measure by using the interactive simulator.
MotorSim 2 (düz bir çizgide hızlanan zaman sadece kendi performansının fiziksel simülasyon yaptığı gibi, bu uygulama bir sürüş oyunu olmadığına dikkat ediniz), kara araçları için bir performans hesap makinesi.
MotorSim 2 teknik özelliklerini yapılandırmak için izin verir ve elde edilen performans hesaplar. (Değil örnekleme ile) procedurally üretilen bir motor sesi hız, devir sayacı, gaz, fren ve vites kolu (elle veya otomatik) ile interaktif bir simülatör, 1/4 mil parça bölüm üzerinde, aracın konumunun bir temsilini içerir. Bir ayar test edildikten sonra, kullanıcı daha sonra diğer bazı ile bu ayar performansını karşılaştırmak amacıyla bir hayalet / gölge kaydedebilirsiniz.
Yapılandırılabilir araç parametreler şunlardır:
- En yüksek güç
- Güç eğrisi (nokta nokta tanımlanabilir).
- Tork eğrisi (güç = tork * rpm, güç eğrisi tanımlayarak otomatik tork bir tanımlamaktadır).
- Maksimum motor RPM (ateşleme kesme).
- Dişli yapılandırması (en fazla 10 dişlilere).
- Dirençler (Cx, ön alan ve yuvarlanma direnci katsayıları).
- Araç ağırlığı.
- Lastik boyu.
- Kaydırma süresi.
- İletim verim.
Hesaplanan performans parametreler şunlardır:
- Azami hız.
- Hızlanma 0-60, 0-100, 0-200, 0-300, ... vb.
- ... ve interaktif simülatörü kullanarak ölçebilen başka.